How to Make a Homemade Tripod for Phones DIY Guide
Table of Content
Today I’m going to show you how to make a very simple mobile phone tripod mount that will cost you next to nothing. The iPhone has a great camera and a great feature that allows you to shoot time-lapses. The only problem is that to take great time-lapse footage with your iPhone, you’ll need to attach it to a tripod. The iPhone itself is not designed to be mounted on the tripod the way a regular camera is. So, to fix this problem, we’re going to make a simple DIY iPhone tripod. This will add stability and prevent the centre pole from wobbling out of place should something shake it around.

Then, at home, create a DIY phone tripod. Here you should start by heating the glass with a heat gun in order to bend it. Feel free to choose the angle that will be comfortable for you while using DIY iPhone stand. Plexiglass should get quite cold while you are keeping the stand in place. Isn’t it great to get a stylish tripod just in 10 minutes?
How do I make a cardboard tripod at home?
Before you begin the DIY phone tripod, I recommend gathering the necessary components. All that’s left now is to connect the T-piece that’s holding the phone connector to the 3” piece of PVC pipe. Now connect that 3” piece to the elbow at the top of the vertical pipe. Put the 13” pipe into the top hole of the T-shaped connector we’ve just used. Attach the final PVC elbow connector to the top of the 13” pipe. You can replace this 13” pipe with a longer or shorter pipe depending on the height you’re going for.
Here you’ll find different options that suit different technical skills and budgets. We’ll go over some super-easy DIY tripods and some slightly higher-level ones if you’re looking for something that lasts. Get your creative iPhone stands going with these homemade iPhone tripod ideas that are truly unique. Remember, these ideas are for iPhone cameras, they can’t be used as backpacking tripods.
Can the whole world fit in texas?
Stick the small piece of cardboard one inch above from the bottom. Pick your ruler and mark 18.5 cm, which supposed to be on the center. Break one stick in a half, and set them underneath the sticks. Put one drops on both sides, and stick the half ones. And you need a balanced tripod, then follow the next sections.

If you want to take high quality iPhone photos, join this professional photography course by Emil Pakarklis. He will show you that you don’t have to buy expensive DSLR for beautiful photos. Now let’s look at how you can position your phone straight.
Step 8: Tripod Legs
As a result, we have such a tripod with a moving head and telescopic legs. If for you this tripod is small then you can increase the initial dimensions of the pipes. Make u shape of the plate and make three holes. A tripod is very handy tool for camera or other works.

Try to bend them out as far as you can. The goal here is to permanently bend them so that they point out of the cap at an angle. Use the scissors to make a vertical cut down the side of the cap. This cut should go from the rim toward the head. I find that cutting halfway down the length of the cap is best.
How to enable motion and fitness on iphone?
Get the spray cap we mentioned in the supplies list. If you’re still struggling to find one, you can use the cap of an aerosol can – as long as it is larger than 7cm in diameter. Any smaller and you’ll struggle to hold the phone. Do you like saving money and DIY projects? We’ll teach you how to make a homemade tripod for phones with easy-to-follow steps and tips.

All fans of Goby tripods will definitely appreciate it. Unlike a popular expensive model, this DIY iPhone tripod is free. Several simple steps will help get a desirable stand. First of all, prepare the above materials and tools. Next, make a large ledge so that it will be able to support a smartphone.
Now you’re ready to start drawing and recording. Remember that you can change the height of the camera by changing the vertical pipe out with a longer piece. Take the extendable phone holder off the old tripod unit.

Just look at this fantastic DIY iPhone tripod. Add some caulking to stabilize the tripod. It will be better to add some caulking to the bottoms of a tail and feet.
It’s made of plastic and has two rubber pads; one of the sides is extendable to fit different phone sizes. The cap with the two bent flaps is what’s going to hold your phone in place. The final step is the cut out a circle in the head of the cap.
Comments
Post a Comment